Furnace repair: Tips to keep your furnace running all winter long

Furnace repair: Tips to keep your furnace running all winter long

Are you dreading the winter months, because you’re worried about your furnace breaking down? Don’t fret. With a little bit of know-how, you can keep your furnace running all winter long. In this blog post, we’ll give you helpful tips to maintain your furnace so you don’t have to worry about it not working when the temperature drops. Read on to find out more about furnace repair and how to keep your furnace in tip-top shape.

Check the air filter

It is essential to regularly check your furnace’s air filter, as a clogged filter can reduce the efficiency of your system and may even cause permanent damage. Inspect the filter at least once every month or two to ensure that it is not blocked with dust and debris. To check the filter, turn off the furnace and carefully remove it from the unit. Hold the filter up to a light source and look through it. If you can’t see light through it, the filter needs to be changed.

Clean the blower

One of the most important steps when it comes to furnace repair is cleaning the blower. A clean blower will help keep your furnace running efficiently and safely. To clean the blower, first, turn off the power to your furnace and remove the access panel. You’ll need to use a brush or vacuum to get rid of any dust or debris inside the blower housing. Make sure to pay special attention to the fan blades, as dirt can build up and affect the way your furnace operates. You may also want to lubricate the motor with a few drops of oil before replacing the access panel and turning the power back on.

Inspect and clean the burners

Burners are an important part of the furnace system and need to be inspected and cleaned regularly. The burners are located behind the access panel and may require special tools to access them. Once the panel is opened, check for any signs of corrosion or damage. If the burners appear to be in good condition, use a soft cloth or brush to gently clean any dust or debris. If there are signs of corrosion or other damage, call a professional for further inspection. Make sure to properly turn off the gas before performing any work on the burner assembly. Once the burners have been inspected and cleaned, replace the access panel and secure it with screws.

Published by Jennifer Esseiva